top of page

Sampling Matters

Sampling Matters

Sampling and sample preparation is the most important part of any grading or analysis task. The very diverse range of analytical instrumentation out there all depends on a very few key factors to be repetitive and accurate towards specification. Its all start with presenting representative and well prepared samples for analysis.

​

Ronin System Solutions is therefore a supplier of quality sampling, dividing, cleaning and counting instruments to facilitate good accurate analysis in you grain grading office or laboratory.

​

Instruments are classified as follow:

​

  • Bulk volume truck samplers for grain intake and dispatch sampling

  • In-line process samplers for sampling in flowing grain chutes

  • Electronic multi-slot sample dividers

  • Desktop rifle / multi slot dividers

  • Laboratory sample cleaners

  • Seed counters

​

 

Rakoraf CEF.png
PFEUFFER Logo.jpg

RAKORAF-CEE

Bulk Volume Truck Sampler

All Electric Bulk Volume Truck Sampler

​

The Rakoraf bulk truck volume sampler assures representative sampling across various grain types. The easy operation and sample transport system delivers the sample right where you need it. The Rakoraf is the front end to the Pfeuffer automated grain sampling system and is "integration ready" to the sample divider, laboratory cleaner and sample removal system which removes the excess sample out of the grading office.

Rakoraf 2.png
PFEUFFER Logo.jpg

RAKORAF-2Linear

Bulk Volume Truck Sampler

Complete and representative samples can be taken from both sides of articulated trains, semitrailers and railway wagons.

​

The Rakoraf 2 linean truck sampler assures representative sampling across various grain types.  The easy operation and sample transport system delivers the sample right where you need it. The Rakoraf is the front end to the Pfeuffer automated grain sampling system and is "integration ready" to the sample divider, laboratory cleaner and sample removal system which removes the excess sample out of the grading office.

PFEUFFER Logo.jpg

DVB-200/300 Process Sampler

In-line Sampler

DVB200.jpg

Process sampler for 200mm & 300mm down pipes.

​

The DVB samplers are used for grains as well as product mixtures made in factories to evaluate in process activities as well as outgoing deliveries (loading of transport containers or vehicles), for example. The sampler is installed in a vertical down pipe and it can take samples in various locations in the process. Sampling is automated and executed with ease. 

Probenteiler-Vario2_17450050_01.png
PFEUFFER Logo.jpg

Vario Divider -Grading 

Automated Sample Divers

The quickest way to divide a sample in sub-samples.

​

The Vario Divider is an electronic sample divider which can be used as part of the automated bulk sampling system or as a stand alone sample divider in the grading office. Various models allows between 1 and 8 representative sub-samples. Infinite adjustable dividing ratios for desired sample size required for analysis or grading activity.

PFEUFFER Logo.jpg
Mehrfachprobenteiler_17450055_01.png

Sample Divider - Ring Test 

Automated Sample Divers

Sample dividing into 8 sub-samples in a single operation.

​

The sample divider have a fixed ratio dividing function to divide bigger samples into smaller, representative samples. The dividers are user friendly and a must have for laboratories conducting ring test analysis. . 

Mehrfachprobenteiler_17450055_02.jpg
PFEUFFER Logo.jpg

Sample Divider - Ring Test 

Automated Sample Divers

Sample dividing into 32 sub-samples in a single operation.

​

The sample divider have a fixed ratio dividing function to divide bigger samples into smaller, representative samples. The dividers are user friendly and a must have for laboratories conducting ring test analysis. 

PFEUFFER Logo.jpg
Riffelprobenteiler_17450020_01.png

Rifle Sample Divider 

Mechanical sample divider product range.

​

The Rifle sample divider is a desktop divider available in 4 sizes. The 3l, 5l, 10l and 18l  dividers are all manufactured in stainless steel and is available in different slot width and slot numbers. 

Riffelprobenteiler_17450020_03.jpg
Riffelprobenteiler_17450020_02.jpg
PFEUFFER Logo.jpg
Probenreiniger-mln_17400020_01.png

MLN

Laboratory Sample Cleaner

Sieve machine with aspiration and de-awner.

​

The MLN sample cleaner correspond with normal in-process cleaning machines. The proportion of impurities (coarse particles, fine particles, aspiration discharge) and the proportion of quality grain can be determined directly upon receipt using a sample. This makes it possible to accept quality grain and reject batches that do not fulfill the contractual conditions in a targeted way.

PFEUFFER Logo.jpg
Probenreiniger_SLN4_17400050_01.png

SLN

Laboratory Sample Cleaner

Sieve machine with aspiration, de-awner and sorting sieve.

​

The SLN sample cleaner correspond with normal in-process cleaning machines. Available in a 3 sieve (SLN3) and 4 sieve model (SLN4). The Additional sorting sieves are for sorting out shriveled and small grain.

The proportion of impurities (coarse particles, fine particles, aspiration discharge) and the proportion of quality grain can be determined directly upon receipt using a sample. This makes it possible to accept quality grain and reject batches that do not fulfill the contractual conditions in a targeted way.

PFEUFFER Logo.jpg
Contador_14100009_01.png

Contador

Seed Counter

The Contador is an optical counter with integrated vibration channel. The counting speed is automatically controlled depending on the size of the material to be counted, so that the counting time is minimized and a high degree of counting accuracy is achieved. The feed container is held by a magnet and is easy to change. Both a sample change and a crop type change can therefore be carried out very quickly. The Contador can be controlled using the keyboard on the device or using the serial interface, e. g. with the »SeedCount« PC software which is available as an accessory.

PFEUFFER Logo.jpg
Contafill_14100050_01.png

Contafill

Filling station for Contador seed counter.

Contafill_14100050_02.jpg

The Contafill is a filling station to be used with the Contador seed counter. The Contafill takes the Contador seed counter to the next level by segregating the desired number of seeds into bags or bottles. The system work as follow:

"Put the seeds into the feed hopper and fit bags to the carousel. Pre-select the number of grains per bag on the Contador or using the PC software and start. The Contador starts and counts the required number of grains into the first bag. The bags can be circulated continuously or individually. In this way, the bags can be replaced at regular intervals, or the entire carousel can be reloaded at the end of counting. This procedure is made easier by the base for the carousel. This reduces the stop times during the filling procedure to a minimum. The Contador automatically detects the bags using a sensor so that no valuable seeds are wasted.

Contafill_14100050_04.jpg
bottom of page